目视检查程序教材.docxVIP

Procedure Number程序编号HY-WP-QC-001Rev. No版本1Page页码1 of 10Document Status：文件状态：PRE/准备 CFC/执行Reference procedure No./Rev./参考程序编号/版本：N/A不适用（This column is modified only when the numbering rule of the Procedure is changed只有当程序编号规则发生变化时才修订此栏）Document Title文件名称：Visual Examination Procedure目视检查程序Document Type/文件类型：Work Procedure工作程序Name Title姓名及职务Signature/Date签名及日期Approved by批准Prepared by编制职务：Title：Reviewed by审核Signature/Date：签名及时期QA ReviewerQA审核Translator翻译Translation reviewer译审Copyright Declaration:版权声明：This document is the property of the SNPEMC. It must not be used, reproduced, transmitted or disclosed without the prior written permission of SNPEMC。本程序未经山东核电设备制造有限公司书面批准不得外用、复制和泄露Historic Record of Modification修改历史记录Rev版本.Issued Date发布日期Scope and Basis of Modification修改范围及依据1The first issuance第一次发布Table of Contents目录1.Purpose目的42.Scope范围43.Reference参考文件44.Responsibilities职责44.1 Quality Management Department质量管理部44.2 Technical Department技术部45. Prerequisite先决条件55.1 Personnel qualification人员资格55.2 Inspection tools检查工具65.3 Surface preparation表面准备65.4 welding requirements焊接要求66. Detailed description详细描述66.1 Inspection tools检查工具66.2 Inspection time检查时间66.3 Inspection methods检查方法76.4 Visual inspection of welded joints焊接接头目视检查76.5 Visual inspection of welded joints for containment vessel CV焊接接头目视检查96.6 Visual examination of welded joints for module 模块焊接接头目视检查107. Records记录108. Appendix附录10Purpose目的This procedure is developed to define the responsibilities and requirements for the visual inspection of the product weld seam done by SNPEMC. 编制本程序是为了明确山东核电设备制造有限公司对产品焊缝外观目视检查的责任及要求。Scope范围This procedure is used to implement the visual inspection of the product weld seam done by SNPEMC. 本程序用来执行对山东核电设备制造有限公司产品焊缝的目视检查。Reference参考文件ASME Code Section Ⅲ division 1, Sub NE 2001ED+2002ADD ASME Code Section Ⅲ division 1, Sub NB, NC, ND, NE, NF 2001Ed.+2002AddASME Code sectionⅪ 2001ED+2002ADD ASME Code sectionⅪ 2001Ed.+2002AddQuality Assurance Manual for Haiyang Project HY-QAM海阳