不锈钢盐雾检测（Stainless steel salt spray detection）.docVIP

不锈钢盐雾检测（Stainless steel salt spray detection） Stainless steel salt spray detection Sun manager 0510 -- -- -- -- -- -ur company provides metal corrosion test test project What is the salt fog test Salt spray test is a kind of environmental test which mainly USES salt spray test equipment to simulate the environmental conditions of artificial simulated salt mist to assess the corrosion resistance of products or metal materials. It is divided into two categories, one for natural environment exposure and the other for artificial acceleration. Artificial simulated conditions of salt spray test is to use a certain volume of space test equipment, salt spray test chamber, in his capacity space, using the method of artificial salt fog environment to the salt fog corrosion resistance properties of the product quality evaluation. Compared with the natural environment, its salt fog environment of chloride salt concentration, content of general natural environment can be salt fog several times or more, make the corrosion speed is greatly increased, salt fog test was carried out on the product, the results of time also greatly reduced. As in the natural exposure environment to test some samples, the corrosion may be 1 years, and under the condition of artificial simulated conditions of salt fog test, as long as 24 hours, can get similar results. The artificial simulated salt spray test also includes the neutral-salt fog test, the salt spray test, copper salt accelerated acetate mist test and the alternating salt spray test. (1) neutral salt spray test (NSS test) It is one of the most widely used accelerated corrosion test methods. It USES 5% sodium chloride saline solution and the PH value of the solution is in neutral range (6 ~ 7) as a solution for spray. Salt spray test temperature 35 ℃, requirements of sedimentation rate in 1 ~ 2 ml / 80 cm2. H. (2) salt spray test (ASS test) It developed on the basis of the neutral salt spray test. It is added some gla