兰大《房屋建筑学》13春在线作业4（Building architecture, building architecture, 13 spring online 4）.doc

兰大《房屋建筑学》13春在线作业4（Building architecture, building architecture, 13 spring online 4） Spring 13 autumn orchid, building architecture, 13 spring online homework 4 Total score: 100 test time: -- Single topic selection Multiple choice True or false (a total of 10 questions, 30 points.) 1. The advantage of vertical wall bearing is (). A. spatial combination is more flexible B. There are fewer doors and Windows on the vertical wall C. Good overall stiffness D. The materials used in the floor are less than the horizontal wall Full mark: 3 2. The available materials for the floating roof of rigid roof are (). A. Cement mortar B. lime mortar C. fine stone concrete D. Waterproof mortar Full mark: 3 3. The building design must meet the following requirements, except where? A. no flammable materials can be used B. adopt reasonable technical measures C. Good economic results D. meeting the overall planning requirements Full mark: 3 4. The specific conditions for determining whether building components meet the fire resistance limit are (). Whether the member has lost the support ability and whether the component integrity has been destroyed or whether the components are burnt A. (1) (2) (3) B. (1) (3) (4) C. (3) (4) D. (2) (3) (4) Full mark: 3 5. () is usually the main factor determining the orientation and spacing of the house. A. Sunshine and dominant wind direction wind direction and rain and snow amount of sunshine and wind speed and direction of wind direction B. Full mark: 3 6. The commonly used sealing material in the section of the roof is (). A. Cement mortar Oil of B. C. fine stone concrete D. Waterproof mortar Full mark: 3 7. In the design of the wall, in order to simplify the construction, avoid cutting the bricks, the length of the wall length is within 1500mm, and the bricks should be used as the bricks. A. 115 mm120mm B. 125 mm C. 240 mm Full mark: 3 8. The floor layer consists of (). A. surface B. structure layer C. cushion layer D. Soil compacted layer E. surface