联想打印机恢复出厂设置（Lenovo printer restore factory settings）.docVIP

下载本文档

28
0
约8.08千字
约 10页
2017-08-15 发布于河南
举报
版权申诉

联想打印机恢复出厂设置（Lenovo printer restore factory settings）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

联想打印机恢复出厂设置（Lenovo printer restore factory settings）

联想打印机恢复出厂设置（Lenovo printer restore factory settings） (1) turn off the printer switch and close the front cover. (2) press and hold the panel button to turn on the printer switch until the Drum light is on. The Drum light indicates that the printer has entered the print test mode. (3) if you want to print the test page, when the Drum light is on, release the panel button and then press again. If you want to select another item, press and hold the button to select the mode in the following table, select the release button, and then press the panel button. Lamp detection mode function Drum Simple test page The printer prints a simple test page and replies to the ready status after printing. Ready Print Configuration print fonts test page The printer prints the current configuration and the internal font table, and replies to the ready state after printing. Alarm reset The printer restores factory settings and replies to ready status after printing. Data Sixteen hexadecimal data printing The printer prints the data into sixteen hexadecimal data to check for data errors or problems. To exit this mode, you must close the printer. 2, LJ880/LJ1600 Press and hold the demo button for 2 seconds until the control panel so the indicator blinks slowly. The printer prints out a page of the demo page. The printer must be in the ready mode. 3, LJ2110/LJ2210 (1) press and hold the panel button to turn on the printer power switch. (2) release the panel button when the four lights are on and the first light is on. (3) press and hold panel button: Inside a second open panel button to print the ordinary self checking proofs. Hold until the second lights then loosen the panel button, for the print cartridge life proofs. Press and hold until the third light is on and then release the panel button. Reset (initialization) for printer. 4, LJ3010A/LJ3116 In ready mode, press online to leave the printer offline. Press the execute button to print out a page test page. In ready mode, press onlin