苹果操作说明（Apple instructions）.docVIP

苹果操作说明（Apple instructions） A: the back cover opens: 1. push from top to bottom (camera direction is on), avoid by all means not directly break apart! 2. note: the round button is the exit key! 3., the headset must be forced to insert the most inside; that is: the metal bar completely inserted into the headset interface, otherwise it may affect the effect of the song because of poor contact! 4., the top boot button, when the machine is used, click once, you can quickly lock the screen! Two, menu flip: Method 1: only need to use a nail tip, a screen, you can flip, force a little or a coincidence operation such as touch screen flip when using a nail cover a little heavier directly make effort to turn over a right, because this is a steel touch screen, support multi touch screen, use a little force the sensitivity is very high! Method 2: hold the screen with your thumb for a while (not at the icon) and press it horizontally with a bit of force! Three, touch slow, ineffective, shift adjustment method: The machine doesnt touch properly, or it feels a little displaced, and touches the calibration once. Its recommended to find a ballpoint pen without a refill. When you calibrate, click on the center of the cross! The calibration will prompt for automatic exit. Without calibration, the cross icon will repeatedly move you up and down, clicking on the center of the cross! - the menu page is about third or fourth pages with an icon: screen calibration or touch screen calibration! Four, add menu interface operation method: (avoid page, often point to a function interface) 1. click any icon in the interface and hold on until the icon wobbles 2. then turn to the last page for the blank page 3. at this time, there are 4 icons below the machine: dial-up, e-mail, browser, music playback, you can drag these 4 icons, function keys to a few blank pages 4. then go back to the first or second page, drag the icons you want to move to the bottom 4, and then put them on the last page in the