matlab图像处理(中).pdfVIP

Matlab 图像处理大作业（2014 中） 火彬TS 三．信息隐藏 1. 实现本章介绍的空域隐藏方法和提取方法。验证其抗JPEG 编码能力。 可以想见，空域隐藏法无法抗JPEG 编码。原因在于量化与反量化的过程中， 处于低位的信息被忽略和改变，无法解码得到正确结果。 需要隐藏的信息段如下： It was the best of times, it was the worst of times, it was the age of wisdom, it was the age of foolishness, it was the epoch of belief, it was the epoch of incredulity, it was the season of Light, it was the season of Darkness, it was the spring of hope, it was the winter of despair, we had everything before us, we had nothing before us, we were all going direct to Heaven, we were all going direct the other way- in short, the period was so far like the present period, that some of its noisiest authorities insisted on its being received, for good or for evil, in the superlative degree of comparison only. 空域隐藏：对输入文段进行DC 编码，数据插入到灰度矩阵。代码如下： （Blankc_info.m） function [wid, key] = Blankc_info(A) load hall.mat; load JpegCoeff.mat; [row, col] = size(hall_gray); codes =; for c = 1: length(A) % DC code A if (A(c)==0) DC_row = 1; else DC_row = floor(log2(abs(A(c))))+2; end len = DCTAB(DC_row, 1); for count = 1:len codes = [codes, num2str(DCTAB(DC_row, count+1))]; end codes = [codes, My_dec2bin(A(c))]; end key = hall_gray; wid = length(codes); row_c = 1; col_c = 1; for count = 1:wid temp = My_dec2bin(hall_gray(row_c, col_c)); temp(length(temp)) = codes(count); key(row_c, col_c) = 0; if (temp(1)==0) for nu = 1: length(temp) if (temp(nu)==0) key(r