第5章 受压构件正截面的性能及设计.pptVIP

5.4.5 矩形截面对称配筋偏心受压构件的计算曲线 大偏压的 N－M－r 计算曲线 当 无量纲化 5.4.5 矩形截面对称配筋偏心受压构件的计算曲线 大偏压的 N－M－r 计算曲线 N－M－r 计算曲线的Matlab源程序 % N-M relationship of compression member with large eccentrictiy % r is reinforcement ratio of compressive bar; % h is height of beam; h0 is effective height of beam; % as1 is distance of compressive bar to the edge; % fy1 is strengh of compressive bar; fc is strengh of concrete h=500; as1=35; h0=465; fy1=300; fc=14.3; for r=0.002:0.002:0.018 n=0:0.01:1.8; m=-0.5*n.^2+0.5*h/h0*n+r*(1-as1/h0)*fy1/fc; plot(m,n); hold on; end grid on; axis([0 0.6 0 1.9]); 5.4.5 矩形截面对称配筋偏心受压构件的计算曲线 大偏压的 N－M－r 计算曲线 0 0.1 0.2 0.3 0.4 0.5 0.6 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 r = 0.002 r = 0.018 N－M－r 计算曲线 计算曲线的适用范围 5.4.5 矩形截面对称配筋偏心受压构件的计算曲线 大偏压的 N－M－r 计算曲线 当 基本公式 无纲量化 变量代换 曲线方程 5.4.5 矩形截面对称配筋偏心受压构件的计算曲线 大偏压的 N－M－r 计算曲线 考虑两种情况的Matlab源程序 h=500; as1=35; h0=465; fy1=300; fc=14.3; for r=0.002:0.002:0.018 n=2*as1/h0:0.01:0.550; m=-0.5*n.^2+0.5*h/h0*n+r*(1-as1/h0)*fy1/fc; plot(m,n,y); hold on; nn=0:0.01:2*as1/h0; mm=0.5*(h0-as1)/h0*nn+r*(1-as1/h0)*fy1/fc; plot(mm,nn,r); hold on; end grid on; axis([0 0.6 0 1.9]); 5.4.5 矩形截面对称配筋偏心受压构件的计算曲线 大偏压的 N－M－r 计算曲线 0.1 0.2 0.3 0.4 0.5 0.6 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 考虑两种情况的关系曲线 r = 0.002 r = 0.018 曲线 直线 5.4.5 矩形截面对称配筋偏心受压构件的计算曲线 小偏压的 N－M－r 计算曲线 基本公式 无纲量化 基本公式 无纲量化 5.4.5 矩形截面对称配筋偏心受压构件的计算曲线 大小偏压的 N－M－r 计算曲线 考虑大小偏压两种情况的Matlab源程序 % N-M relationship of compression %member with large eccentrictiy % r is reinforcement ratio of %compressive bar; % h is height of beam; h0 is effective %height of beam; % as1 is distance of compressive bar %to the edge; % fy1 is strengh of compressive bar; %fc is strengh of concrete h=500; as1=35; h0=465; fy1=300; fc=14.3; beta1=0.8; kexib=0.550; for r=0.002:0.002:0.018 n=2*as1/h0:0.01:kexib; m=-0.5*n.^2+0.5*h/h0*n+r*(1-as1/h0)*fy1/fc; plot(m,n,y); hold on; nn=0:0.01:2*as1/h0; mm=0.5*(h0-as1)/h0*nn+r*(1-as1/h0)*fy1/fc; plot(mm,nn,r); hold on; nnn=kexib:0.01:1.8; kexi=(nnn+r*fy1/fc*kexib/(beta1-kexib)