瓶子uv丝网印刷技术培训资料 三（Bottle UV screen printing technology training materials three）.docVIP

瓶子uv丝网印刷技术培训资料 三（Bottle UV screen printing technology training materials three） Bottle UV screen printing technology training materials three Factors affecting bottle adhesion A bottle of material: Print material if its material is impure If the material of the printing material is impure, it will have a considerable influence on the adhesion force. At present, the printing material is impure, mainly in the synthetic material and the nozzle material. Because of the differences in the process of injection molding, the surface of the plastic material shows different conditions. Many of the materials have grease on the surface, which will affect their adhesion. The color of the bottles material also affects the reception of UV light, which can also affect its adhesion. Two prepress processing of bottles In order to get the ink on the substrate with good adhesion, must to bottle the poling process, the tension surface to make the surface tension of the bottle is not less than 3.8 * 10-2N/m (one of the most basic conditions in general, the ink on the substrate has good adhesion to the surface tension of the substrate is at least 50dyn / cm above). The method of polarization treatment of bottles is mainly flame treatment. The principle of flame treatment is to remove the surface of the plastic by high temperature, and to melt the surface of the film, so as to improve the surface energy of the plastic bottle and improve the adhesion of the surface to the ink. In short, before printing, one must ensure that the substrate surface cleaning and effective polarization treatment, bottle surface treatment is not complete, adhesion force will inevitably have an impact. Flame treatment The flame processor consists of a belt, a tapered plug, a flame nozzle, and a gas tank. Use the plastic bottle into the conical plug column, the conveyor belt moving forward, not to the flame nozzle, the conical plug starts to rotate, which drives the bottle to rotate, the blue flame ablation on the