综合布线规范（Generic cabling specification）.doc

综合布线规范（Generic cabling specification） 3, the engineering design of buildings and buildings should be based on actual needs, select the appropriate configuration of integrated wiring system. When the use requirements of the network are not clear, they should be configured as follows: 1, minimum configuration: suitable for integrated wiring system configuration standards lower occasions, with copper core twisted pair cable networking. 1) each work area consists of 1 information outlets; 2) the distribution cable for each information socket is 1 pairs of 4 twisted pair cables; 3) the main cable configuration of the computer network are advised by the 24 information receptacle with 2 pairs of strands, or a hub or hub (HUB) group (group HUB) with 4 pairs of strands; on the phone at least each information receptacle with 1 pairs of strands. 2, basic configuration: suitable for general distribution system, medium configuration standard occasions, using copper core twisted pair cable networking. 1) each work area consists of 2 or more than 2 information outlets; 2) the distribution cable for each information socket is 1 pairs of 4 twisted pair cables; 3) the main cable configuration of the computer network are advised by the 24 information receptacle with 2 pairs of strands, or a hub or hub (HUB) group (group HUB) with 4 pairs of strands; on the phone at least each information receptacle with 1 pairs of strands. 3, comprehensive configuration: suitable for integrated wiring system configuration standards higher occasions, using fiber optic cable and copper core twisted pair cable hybrid network. 1) the basic configuration of the information outlets as the basis for configuration; 2) vertical configuration: each of the 48 information outlets should be equipped with the 2 core fiber, suitable for computer network; telephone or computer networks, the twisted pair cable, according to the information required on the 25% Socket line configuration of vertical trunk cable, or accor