轴承套圈磨削加工技术分析（Analysis of grinding technology for bearing rings）.doc

轴承套圈磨削加工技术分析（Analysis of grinding technology for bearing rings） Analysis of China automobile bearing bearing grinding grinding technology: the amount of labor accounted for about 60% of the total amount of labor used in grinding number accounted for 60% of the metal cutting machine tool, which is counted in the production of bearings. Interest in grinding accounts for more than 15% of the total cost of bearings. For high precision bearings, these ratios are greater for grinding. In addition, the grinding process is the most complex process, and the understanding is still the most inadequate link. The complexity indicates that the required performance index is more and more accurate, the machining forming mechanism is more complex, and the machining accuracy is influenced by many factors. It is difficult to detect the machining parameters on-line. Therefore, for the grinding process of one of the key processes in bearing production, how to use the new process and new technology to complete the grinding process with high precision, high efficiency and low cost is the main task of grinding process. 1 high speed grinding technology The general production efficiency can be increased by 30% and 60%, and the durability of the grinding wheel can be improved by about 0.71 times. The high-speed grinding can realize the two major goals of the modern manufacturing technology, and improve the quality and efficiency of the products. Practice has proved that if the grinding speed is increased from 35m/ to 50 60m/. The surface roughness parameter of workpiece is reduced by about 50%. Taking the lead in the application of high-speed grinding technology in the ring grinding process of domestic bearing industry, we have successfully developed high rigidity, high speed, high power motorized spindle and high speed grinding wheel. High speed grinding at home and abroad has long been widely used, and with the widespread use of high grinding ratio, the general grinding speed of more than 4