挖掘机等机械面临大修时要注意的事项（Excavators and other machinery should pay attention to the major overhaul）.docVIP

挖掘机等机械面临大修时要注意的事项（Excavators and other machinery should pay attention to the major overhaul） To the attention of excavators and other machinery overhaul face issues.Txt30 the beauty of life, never to show her ahead; as beautiful trees, is displayed in its negative potential to touch the sky in the vigor; as beautiful eagle, is displayed in its fight to fly the wind and the rain as God in the soul of the river like; beauty is displayed in its roaring waves flowing torrent. Excavators and other machinery in Hefei excavator schools are faced with the need to pay attention to the overhaul, for such or such reasons, construction machinery will inevitably face the embarrassment of overhaul. Here is a brief introduction of the general process of construction machinery overhaul: I. technical appraisement At present, some engineering machine is overhaul repair restore its performance, the machine after a long time of operation, the main components and assembly of aging have reached the limit, it should be all machines for disintegration, cleaning, inspection and repair, make its performance reach the factory standard. Engineering machinery overhaul is needed before technical appraisal, by using the unit technical person in charge, management, maintenance and driving personnel to participate in, before testing pressure, flow rate, temperature and the disintegration of the torque performance of each part of the machine, and to review the documents and records operation data, detailed assessment of fuel oil and lubricating the oil consumption, and make a detailed record. Then compare the major repair parameters provided by the original manufacturer to determine if it needs to be overhauled. The main technical condition to determine whether the construction machinery needs to be overhauled is: The dynamic performance of engine oil consumption declined more than 20%; more than a fixed value of 1 times above; cylinder pressure of the engine reaches more than 45 degrees centigrade