吹塑技术（Blow molding technology）.docVIP

吹塑技术（Blow molding technology） Plastic processing method of blow molding technology of blowing technology a kind of rapid development. Tubular plastic parison of thermoplastic resin by extrusion or injection molding obtained, while hot (or heated to the softening state), placed in the mold, die immediately after the parison is filled with compressed air, so that the plastic parison blowing mold and clings to the inner wall, the cooling and demoulding, obtain various hollow products. 1 Introduction 2 pollutants directory technology development prospects of 3 control points of 4 of the 1 technology development prospects 2 3 4 control points of the 1 technical brief edit this paragraph of blow molding process during the Second World War began for the production of low density polyethylene bottles. In late 50s, with the development of the birth of high density polyethylene and blow molding machine, blow molding technology has been widely applied. Hollow container volume is up to thousands of liters, some production are controlled by computers. Suitable for blow molding plastic polyethylene, polyvinyl chloride, polypropylene, polyester, the hollow container is widely used as an industrial packaging container. According to the method of making preforms, blow molding can be divided into extrusion blow moulding and injection blow molding, newly developed multi-layer blow molding and stretch blow molding. Edit this paragraph 2 prospects for development in recent years, with the development of various functional beverage and wine packaging market, a variety of multilayer co injection blow molding technology has become a hot market. Flexible one-step injection stretch blow molding products hollow production technology has the advantages of uniform thickness, good dimensional stability, light weight, high strength, so the application range is very wide. Because the container production injection stretch blow moulding by PET, PP, PE, PVC and other materials as raw materials, and