镀锡铜带（PV Ribbon）.docVIP

镀锡铜带（PV Ribbon） Types of tin plating Tin and its alloy is a kind of coating with good weldability and corrosion resistance. It is widely used in electronic components and printed circuit boards. The preparation of tin layer, in addition to hot dipping, spraying and other physical methods, electroplating, dip plating and electroless plating methods have been widely used in industry because of their simplicity. Dip tinImmersion plating is to dip the workpiece into a solution containing the metal salt. The metal coating is deposited on the surface of the workpiece according to the chemical replacement principle. This is different from the conventional electroless plating because the plating bath contains no reducing agent. Contact plating is not the same, contact plating is the workpiece immersed in the plating metal salt solution must be closely connected with a reactive metal, the active metal as anode metal ions released into the solution, high potential in the solution obtained after electron deposited on the workpiece surface. Tin dipping is currently performed only on iron, copper, aluminum and their alloys. Electroless tin plating The reducing agent used in autocatalytic deposition of copper or nickel cannot be used to reduce tin. The simplest explanation is that the excess hydrogen evolution potential on the tin surface is high, and the reduction agents are hydrogen evolution reactions, so it is impossible to reduce the tin ion to tin. For electroless tin plating, it is necessary to choose another type of strong reducing agent that does not resolve hydrogen, such as Ti3+, V2+, Cr2+, etc. only T3+/Ti4+ series are currently available. Edit this paragraph tin use (1) manufacturing tin tin coating: non-toxic, a large number of objects used in contact with food and beverage in the biggest use is made of tin cans, such as kitchen utensils, food fork, oven etc. (2) the electrical and electronic industry: for easy welding tin, conductive good, widely used