楼梯踏步规范（Staircase specification）.docVIP

楼梯踏步规范（Staircase specification） To determine the size of each part of the 1. stairs According to the stair width and depth, the height of each layer, determine the stair step height and width, length and width, ladder and platform width. (Note: double run stair step series of each layer is best to take even the two step is equal to the number of runs. ) (1) in the form of stairs and suitable slope is determined according to the position and nature of the buildings, the stairs stairs between the size of. The initial step width of B and to determine the time (Note: B bmin, H bmin and Hmax using Hmax, respectively. The minimum and maximum time width of various buildings still high. The value of B, H) Refer to Table 2.1 and table 2.2. Table 2.1 general staircase design reference size The name of /mm high step step width of /mm The maximum value of the minimum value of common used Residential 175150 ~ 175260260 ~ 300 School 150120 ~ 150260260 ~ 300 The office building of 160140 ~ 160280280 ~ 340 Kindergarten 150120 ~ 140260260 ~ 280 Sanatorium 150300 The theatre hall, 160130 ~ 150280300 ~ 350 (2) according to the stair width size determination bench width B and ladder wells width. (3) determine the time series adjustment step. And the curse, high step width of B, with high H by step h, to step n is H/h series, when a decimal, integer, and adjust the time to (H = H/n), using the formula b+h=450 (mm), or b+2h=600 (mm ~ 620). To determine the step width of B. (4) to determine the width of the platform stairs. Note (staircase width). (5) the step width of B and each ladder series, determine the horizontal projection length L bench. (as the number of steps of the tread). According to the above 2. dimensions to draw the bottom of the stairs, two layer and top layer layout sketch 3. determine the staircase structure and form Determine the stairs for cast or prefabricated, the ladder is a plate or beam plate, and platform support. 4. check the height of the stairs clearance, to