注塑调机（Injection molding machine）.docVIP

注塑调机（Injection molding machine） Our goal: With the skills and ideas to those armed active person The first chapter is the basic of plastic injection molding Plastic has the advantages of light, cheap and tough Department of plastic made from oil, however, some people say: use plastic instead of saving oil consumption. From the aspects of synthesis, molding, transportation, plastic consumes less energy than any other materials. Its biggest advantage is easy processing. The purpose of the use of plastic: In order to reduce the material cost Because the resources are relatively cheap, but shall be suitable for the most appropriate place. In order to reduce the production cost Suitable for plastic production, processing can be simplified and automation engineering. In addition, mostly through the plastic but made is finished, without coating, repair after processing, therefore, can reduce the amount of equipment investment. Processing should be considered to minimize manual. In order to reduce the weight Only 1/8 of the proportion of light rail. Reduce part can use and promotion of use. In order to avoid rust and corrosion. Plastic will not have corrosive rust. Because do not need anti rust treatment, can reduce the number of artificial. However, waste treatment usually does not decay, worry. In order to achieve the ideal shape Can be made of sheet metal stamping, impossible to form or character. In order to achieve the ideal shape and appearance Bright color, usually without coating, can achieve excellent shape, beautiful style. Heat insulation form Good insulation, can be applied to insulation, use. The use of plastic material is should pay attention to Poor precision Expansion coefficient, usually bi metal more digits. In addition, some plastic deformation due to temperature or high dimensional change. Heat resistance is poor Poor resistance to high temperature, usually no more than 100 degrees. Flammability Most are flammable, toxic gases, some plastic combustion in