海恩法则（Hain rules）.docVIP

海恩法则（Hain rules） Hain rules Hain rules Hayne is the inventor of the German German aircraft turbine Pabs Hein proposed a in the aviation industry on the flight safety rule, Hayne rule points out that behind every serious accident, and there must be 29 minor accidents and 300 threatened and attempted accidents since 1000. Law stresses two points: first, the accident is the result of the accumulation of quantity; two is a better technology, and then perfect rules and regulations, at the actual level of operation, but also can not replace peoples own quality and responsibility. [editor] the use of Haynes law The Hayne rule is mostly used in the production management of enterprises, especially in the safety management. The Hayne rule is a warning to the enterprise, it means any accident for a reason, and there are signs of it at the same time; safety production can be controlled, safety accidents can be avoided; it also gives a method of enterprise management of production safety management, and found that control signs. Specifically, the main steps for the safety management of production using the Hayne law are as follows: 1. first of all, any production process should be programmed, so that the entire production process can be considered, which is the premise of identifying the symptoms of the accident. 2., each procedure should be divided into the corresponding responsibility, can find the corresponding person in charge, let them realize the importance of safety production, and the great harm caused by the safety accident. 3. according to the possibility of the production procedure, list the possible accidents of each procedure and the precursor of the accident, and train the staff to be sensitive to the accident omen. 4., in each program must develop regular inspection system, as soon as possible to identify the signs of the accident. 5., in any procedure, once the hidden dangers of production safety accidents are found, timely reports should be promptly eliminated.