煲机教程（During the tutorial）.docVIP

煲机教程（During the tutorial） Step 1: The Internet to download a Test Tone Generator software, and installed. Step 2: Then you can start the machine. In general are used in low frequency, so the low frequency can be set to TTG. Fixed frequency method At a fixed frequency output (Constant Tone) Frequency that a numerical input, from 20 to 50, and then select the Loop, set a time in Duration, the author here is set to 1, the Wave Form is set to Sine (Xian Bo), Amplitude is set to 0 (pictured), and finally the headset is inserted in the card, let the headset long time work. Scanning frequency method In the scanning frequency (SWEEP) of the Initial Frequ1ency in the initial input frequency, the input end of frequency in the Final Frequency, the author thinks that from 20Hz to 100Hz is more appropriate; the input scan a time used in Duration, then the other operation and fixed frequency method. After the new headset torture, you will find the headset performance than at the beginning of a lot of good, this is in effect with mining. To those who enjoy high quality and buy new friends before using the headset, dont forget your headset Cooker! Burn notice: 1. headset couldnt work for too long! Since the voice coil resistance, long working hours will be fever, and possibly may destroy the voice coil! It is best to burn two hours per stop for a few minutes and then burn. The 2. volume do not too large, earplugs diaphragm is very fragile materials, the volume of Congress to make the voice coil motion travel increased, the film was violent shock leads to pull, voice coil loose, the diaphragm deformation and tearing. 3. praise again look at their potential if you take the headset general headset will not have a good effect! In the topic of long-standing, the theory Public opinions are divergent.. The old dog for the first time on how to such a problem, there is Chen rotten millet bran too, but old wine in new bottles of chinese. You can drink three cups, which taste different kind o