电动机维修大全（Motor maintenance Guinness）.docVIP

电动机维修大全（Motor maintenance Guinness） The motor fault diagnosis method and maintenance Raiders _ turn] motor fault or fault judgment method of operation and maintenance strategy of electrical and electronic technology _ motor, can timely prevent and eliminate the fault by watching, listening, smell, touch the four methods, to ensure the safe operation of the motor. First, to observe whether there is any abnormality in the operation of the motor, and its main manifestations are as follows. 1. when the stator winding is short, you may see the motor smoke. 2. when the motor is seriously overloaded or out of phase, the speed will slow down and there will be a heavy buzzing noise. 3., the motor is running normally, but when it stops suddenly, it will see the looseness of the wiring and spark. The fuse is blown or some part is jammed. 4. if the motor vibration, it may be stuck or fixed gear motor, bad foot bolt loosening. 5. if the motor contacts and connections have discoloration, burning marks and smoke traces, it may indicate partial overheating, poor contact at the conductor joint or winding burnout. Two, listen to the normal operation of the motor should be issued a uniform and lighter hum sound, no noise and special Sound. If the noise is too large, including electromagnetic noise, bearing noise, ventilation noise, mechanical friction sound, etc., may be a sign of failure or malfunction. 1. for electromagnetic noise, if the motor sends a high, low and heavy sound, the reasons may be as follows. (1) the air gap between stator and rotor is uneven. At this time, the sound is high and low, and the interval between the high and the low is constant. This is caused by the wear of the bearings, which makes the stator and rotor not concentric. (2) unbalanced current of three-phase. This is the reason why the three-phase winding has the wrong grounding, short circuit or bad contact. If the sound is very dull, it shows that the motor is seriously overloaded or lack of phase oper