电子实训2（Electronic training 2）.docVIP

电子实训2（Electronic training 2） 2.txt2008 electronic training is not normal, everything is normal! At this critical moment, China men to prove to the world: China men or normal! Abstract: radio installation, welding and debugging, let us understand the assembly process of electronic products; master the identification and quality inspection of electronic components; learning machine assembly process; cultivate the ability and rigorous style of work. Key words: radio installation, commissioning, operation principle. I. Introduction: sometimes we think simple things, as its only know that it is not as simple as we thought. Any one thing to do is to master certain techniques, but also must have certain qualities to be completed. To understand a work, grasp the operation technology and electronic welding process, and this alone is not enough to explain the reading. The practice is to practice, to operate. To really put the books from the theoretical knowledge to practical operation, in practice. There is not with my temper, must operate under the guidance of the teachers, explain, strictly abide by the rules, can not own cleverness. Two am, AM radio circuit diagram, circuit diagram, signal process is as follows: The basic working principle of the radio: The antenna receives the electromagnetic wave signal after frequency tuner, select the radio signal to be received. At the same time, on the radio, a local oscillator, a frequency similar with receiving the vibration signal with the received signal, mixing, difference frequency generation, the difference frequency is intermediate frequency signal. The intermediate frequency signal after frequency selective frequency amplification, and then detection, get the original audio signal. The audio signal through the power amplifier, can be sent to the speaker. The high frequency signal received by the antenna oscillator and a radio frequency input circuit (the frequency of a high frequency signal is outside fixed if provisions of