聚羧酸盐高性能减水剂使用的注意事项（Polycarboxylate high performance reducing agent using the matters needing attention）.doc

聚羧酸盐高性能减水剂使用的注意事项（Polycarboxylate high performance reducing agent using the matters needing attention） How does concrete condense with a polycarboxylate admixture? Polycarboxylic acid admixture ultra sensitive, can not see ash, the aggregate requirements are very high, or soil ash dry quickly, and adding water is also useless. Maybe your stone is not so good. General naphthalene water reducer for more. Two. What is the cause of the slump loss of concrete using polycarboxylate admixture? 1, the ingredient is not enough 2, the content of cement C3A is too high, and the dehydration of gypsum in the process of ink and wash will cause the setting time of cement to be very fast 3, admixture and cement do not adapt 4, the material contains large amount of mud, foreign adsorbent adsorption, increase the amount of admixture. Three. What are the causes of the slump loss of concrete using polycarboxylate admixtures? There are several reasons for the increase of concrete slump after an hour: 1. The parameter of polycarboxylate admixture is too large 2 、 polycarboxylic acid admixture belongs to slow release admixture 3, concrete began to stir is not enough. Plus sodium, if not improved, it is recommended to replace the polycarboxylate masterbatch or replacement cement, and check whether other raw materials have problems, such as sand gravel, mud is too much. Four. The application of polycarboxylate superplasticizer, the reducing agent is Jianshuiji products of the latest development of a class, has its own characteristics, therefore polycarboxylate superplasticizer and common sense precautions as follows: Polycarboxylate superplasticizer of light color, no odor, high water reducing rate, low volume, low alkali content, concrete shrinkage configuration, good strength, is an environmentally friendly and efficient concrete water reducing agent. Precautions for the use of polycarboxylate high-performance water reducing agents: 1, shall not be mixed with other admixtures, especially