车速测量传感器（Speed measuring sensor）.docVIP

车速测量传感器（Speed measuring sensor） vss Speed sensor detection electric vehicle speed control computer with the input signal to control the engine idle speed, torque converter automatic transmission lock and other functions of automatic transmission shift and engine cooling fan opening and closing and cruise and other. The output signal of the speed sensor can be magnetoelectric AC signal, can also be a Holzer type digital signal or photoelectric digital signal, speed sensors are usually installed in the drive axle or the transmission housing, the speed sensor signal line is usually installed in the shielding casing, which is in order to eliminate the electromagnetic voltage line of fire and car phone or other electronic devices and RF interference, to ensure the electronic communication without interruption, to prevent poor or other problems in the automobile driving performance, magnetoelectric and photoelectric sensor is the most widely used two kinds of speed sensor, in Europe, North America and Asia various automobiles more widely used magnetoelectric sensor to speed (VSS), crank angle (CKP) and cam angle (CMP) control at the same time, you can also use it to feel the speed and other rotating parts Place signals, such as compressors, clutches, etc.. 1) magnetoelectric speed sensor, magnetoelectric speed sensor is an analog AC signal generator, which produces alternating current signals, usually composed of two terminals with magnetic cores and coils. The two coil terminals are terminals of the sensor output. When the rotating ring made of iron (sometimes referred to as the magnetic pulley) rotates through the sensor, the coil generates alternating voltage signals. Each of the gears on the magnetic pulley will produce a series of pulses corresponding to the same shape. The amplitude of the output signal (peak to peak voltage) is proportional to the speed of the magnetic pulley, and the frequency of the signal is expressed in terms of the speed of the magnetic pulley