1-2物理练习（1-2 physical exercises）.doc

1-2物理练习（1-2 physical exercises） The first chapter, second hours A choice (10 items, each item of 6 points, a total of 60 points, the four options for each question there are at least one with students, all selected for the 6 points, failed to choose 3 points, 0 points the wrong) 1. as shown in figure A and B, two objects are folded together, lean against the vertical wall, and then released by rest. The two are sliding along the wall at the same time, known as mAmB, A, B A.A, B, two objects are not subject to friction B. object A is supported by B equal to its gravity C. object B is subjected to three forces D. object A is subjected to two forces [analysis] as a result of A, B two objects together free fall are in complete weightlessness, so A and B have no force in the horizontal direction of A, B and the wall are not positive pressure, so the friction force effect, A and B are only by a gravity A. [answer] A 2. (2011 Hefei quality inspection) as shown on the right, the level of block was placed on the desktop A in a static state, the total mass of the hanging weight and tray 0.6kg, spring dynamometer readings for the 2N, if the light. If the friction pulley in the part weight disk, so that the total quality will be reduced to 0.3KG. The case (g = 10m/s2) () A. spring dynamometer readings will be smaller B.A is still still The friction of the C.A against the table remains the same The resultant force of the D.A will grow [analysis] total quality when the weights and tray is M1 = 0.6kg, Ff = F + m1g = 6N, Ff = 4N, the maximum static friction that A and the desktop is at least 4N, when the weights and tray weight of M2 = 0.3KG, A is still not moving, F constant, F + Ff Ff = = m2g, 1N4N, so the hypothesis, A still motionless, the A force remains zero, the friction of the desktop A reduced to 1N, spring dynamometer shows the number of unchanged, so only the correct B. [answer] B 3. (2011 Zhengzhou quality inspection) as shown on the right, 80N objects A on the rough su