autocad 应用技巧(椭圆)（autocad 应用技巧 (椭圆)）.docVIP

autocad 应用技巧(椭圆)（autocad 应用技巧 (椭圆)） AutoCAD application skills 1. in AutoCAD, sometimes the * * point mark is generated at the click of the mouse. Using the BLIPMODE command, typing OFF at the prompt line eliminates it. 2., some users use AutoCAD, you will find that the dialog box in the command will become prompt, such as print commands, control it is the system variable CMDDIA, turn it off. The ellipse generated by the 3. ellipse command is either a polyline or an ellipse. It is determined by the system variable PELLIPSE, and when it is 1, the ellipse generated is PLINE. The 4.CMDECHO variable determines whether the command line echo is generated, which should be set to 0 in the program execution. 5.DIMSCALE determines the size of the scale, the value is integer, default by 1, in the graphics have a certain proportion of scaling, it is best to change it to zoom ratio. The 6.BREAK cuts off two points of the entity and, when selected at second, such as @, can be separated by the first entity. High version of 7.CAD provides tolerance, but the roundness and coaxiality of the circle is not round, in fact, the definition of a symbol in the AutoCAD installation directory under the SUPPORT directory of the gdt.shp file in the common AutoCAD, the No. 2 and No. 4 character defined circular shapes, circular arc actually 127 degrees, but not too good correction (such as for 90 degrees more ugly). 8. hollow shaped Chinese characters such as the use of AutoCAD R14 in the BONUS function (must be fully installed AutoCAD, or custom installation chose it), there is a TXTEXP command, text can be fried line is very useful to do three-dimensional characters. 9.AutoCAD R14 BONUS, there is a ARCTEXT command, can achieve arc text output, the use of methods for the first choice of arc, and then enter the text content, press OK. There is also a useful command in 10.BONUS, MPEDIT, that uses it to modify multiple lines into a polyline, and then changes its line width. The 11.image command re