awos 题目20070323(问答题)（AWOS 题目20070323 (问答题)）.docVIP

awos 题问答题)（AWOS 题(问答题)） On the working principle of Grohe cloud. The ceilometer transmitter emits a beam of light pulse to pulse, sent from the transmitter, the cloud base after reflected by the receiving terminal detected by measuring the optical signal from transmitter to be received by the time required to determine the height of the cloud. Since the instantaneous intensity of the return signal reflects the atmospheric reflectance at the corresponding height, information about clouds, fog and rain can be obtained from the return signal. The height of reflector is H = C*T/2 (C is speed of light, T is time) Five Two What are the main components of the CT12K cloud Grohe transmitter? Including high-voltage rectifier, laser diode, laser diode trigger circuit. Five One Please draw a block diagram of the CT12K cloud Grohe transmitter. [answer to the CT12K cloud Grohe technical manual. Block diagrams have to be entered by question Five Two What are the main components of the CT12K cloud Grohe receiver? Receive photoelectric tube, high voltage power supply, filter, I-U conversion pre amplifier. Five One What are the 4 main parts of the electronic circuit for the CT12K cloud Grohe processing board CTM12? CPU section, monitor section, sequence control section, amplifier section. Five One What effect does each of the two photodiodes on the CT12K cloud Grohe monitor board play? One is used to monitor the laser frequency, and the other is to monitor the background noise of the sky. Five One What are the components of the laser pulses produced by CT12K cloud Grohe and what are the controls? A potassium arsenide laser diode is produced by the transmitter plate CTT12 to emit laser pulses under the control of the laser trigger signal of the processing plate. Five Two Describe the calibration steps for the CT12K cloud Grohe. Black, non reflective cloth will completely cover the transmitter window ceilometer, connected to a portable computer, even in the PCPLUS p