cad绘图基本（CAD basic drawing）.docVIP

cad绘图基本（CAD basic drawing） 12 and three-dimensional mesh (3dface): this method is too impractical An entity model is the easiest to use 3D model. Using the solid model of AutoCAD, 3D objects can be created by creating cuboid, cone, cylinder, sphere, wedge and torus entity model. These shapes are then merged to find their difference sets or intersection (overlap) parts, which combine to produce more complex entities. You can also create objects by extending two-dimensional objects along the path or rotating around the axis. With the help of Mechanical Desktop, you can also define parameterized entities to preserve the association between 3D entities and the two-dimensional views generated from them. Notice！ Since 3D modeling can adopt different methods to construct 3D models, and each edit method has different effects on different models, it is suggested that the modeling methods should not be used in a mixed way. There are only limited conversions between different model types, from the entity to the surface, or from the surface to the wireframe. But not from the wireframe to the surface, or from the surface to the solid. 13, rotation surface (revsurf) REV: the path curve or profile (line, circle, arc, ellipse, ellipse, polyline, polygon, closed spline curve or ring) around the axis of rotation of the polygon mesh is selected to construct an approximate rotation surface. 14, translation surface (tabsurf): refers to an initial trajectory (the beginning of the surface of this line) along the specified vector (the translation of the initial edge of the length of the direction) stretching into the surface. Note: you can put the translation surfaces to the predefined the initial trajectory curve (line, circle, arc, spline curve, 3D and 2D polylines, line) tensile track line along a specified distance and direction of translation (tensile), surface formation (this from you surface and track line is still two different entities). 15, straight line curve (rulesurf): refers