fag（FAG）.doc

fag（FAG） One FAG deep groove ball bearings are not separable. Sealed deep groove ball bearings can be maintained without maintenance and can simplify the structure. It can bear radial and axial loads, and allows high speed. Because of these characteristics and its low price, it has become the most widely used type of bearing. But the automatic self-aligning ability of deep groove ball bearings is limited. The basic types of FAG deep groove ball bearings are open, double sided with sealing rings or double sided with dust-proof. The bearing with the sealing ring is provided with a groove which can be provided with a sealing ring or a dust cover on the outer ring, and can also be supplied as an open bearing. FAG sealed deep groove ball bearings In addition to open deep groove ball bearings, the FAG also offers double sided dust cover (non-contact seal) or double sided sealing ring (contact seal) bearings as the basic form of deep groove ball bearings. Bearing with dust cover (suffix.2ZR,.2Z of outer diameter less than or equal to 22mm) is lower than open bearing. The RSD type non contact sealed bearings have the same good frictional characteristics as the non contacting.ZR type sealed bearings. When the inner ring is fixed and the outer ring is rotated, the lubricant loss of the RSD type sealing bearing is lower than that of the ZR type sealed bearing. Contact sealed bearings (.2RSR, bearing outer diameter of not more than 22mm for.2RS), speed is subject to the sealing lip allowed sliding speed limit. FAG stainless steel bearings FAG offers deep groove ball bearings made of stainless steel with X65Cr13 (material code: 1.3541M) stainless steel and double sided deep groove ball bearings (.2RSR). The ball is made of high-quality alloy steel X102CrMo17 (material No. 1.3543) manufacturing. This bearing model has the prefix S and the suffix W203B. The S60, S62 and S63 type stainless steel bearings of FAG are the same size and permissible load as the corresponding type of int