ping命令用法1（The ping command usage 1）.doc

ping命令用法1（The ping command usage 1） Ping command detailed Network testing tool built in system Ping The syntax format of the 1.Ping command The ping command looks like a small tool, but it has many parameters, is really not easy to fully grasp the use of it, to achieve proficiency in the use of even more difficult under the difficult, but no matter how we have to look at it for what it is, first of all we are from the most basic command format to start! The complete format of the ping command is as follows: Ping [-t] [-a] [-n count] [-l length] [-f] [-i ttl] [-v tos] [-r count] [-s count] [-j -Host list] [-k Host-list] [-w timeout] destination-list | From this command, you can see its complexity, and the ping command itself is followed by its execution parameters. Lets give a detailed explanation of its parameters! - -t - when you have this parameter, when you Ping a host, the system keeps running the ping command until you press Control-C. -a - resolve the hostname of the NETBIOS host, and if you want to know the name of the computer you want to Ping, add this parameter, which is typically displayed in the first line after the ping command is used. -n count - defines the number of test packages to be issued, and defaults to 4. Through this command can send the number of their own definition, is very helpful to measure the speed of the network, for example, how much I want to test for sending 20 packets back to the average time, how much is the fastest time, the slowest time is how much you can through the implementation of this parameter with the order that. -l length: define the send buffer packet size, send windows by default Ping packet size is 32byt, it can define their own, but there is a limit is the maximum can only send 65500byt, more than this number, the other side is likely due to the received data packet is too large the crash, so the Microsoft Corp in order to solve the security vulnerabilities and limits the Ping packet size. -f - send the dont fragme