dmx125 使用教程（Dmx125 tutorial）.docVIP

dmx125 使用教程（Dmx125 tutorial） DMX-512 programming instructions Turn on the power 1, open the power supply, wait for about 5 seconds to show 101, press the program button for about 3 seconds into the programming state, corresponding to the digital screen program indicator light flashing; 2, press the bank button up and down to select the program number to edit; 3. Select the light number to control. Press the numeric key under scammers; 4, set the lamp the function of the data (i.e., push scenes under the fader to the desired position); 5, press the midi/add button, and then press the scenes under the 1 key, the surface of the board all the flashing a few times, such a scene is set up; 6, choose to control the lights, press the scammers digital key below, the function setting lamp data (i.e., push scenes under the fader to the desired position), click midi/add button, click the scenes followed by 2... 8 keys, each program can be compiled 8 scenes, compiled by the program button, about 3 seconds to exit the programming state, the program will automatically store. Function 1, open the power supply, wait for about 5 seconds, digital screen shows 101, press the bank button up and down to select the program number to run; 2, click auto/del button that will run the program, adjust the SPEED and FADE TIME fader can change the running speed and time, the program can be run in the press bank on the key to run the program, click Blackout button will enter the suspended state. delete 1, open the power supply, wait for about 5 seconds, digital screen shows 101, press the program button for about 3 seconds into the programming state, corresponding to the digital screen program indicator light flashing; 2, press the bank button up and down to select the program number to be deleted; 3, at the same time press the auto/del and scenes under the 1 key, the board all the lights flashing a few times, to prove that the first scene has been deleted; 4, at the same time according to auto/de