proe工程图的配置参数含义（The configuration parameter meaning of proe engineering drawing）.doc

proe工程图的配置参数含义（The configuration parameter meaning of proe engineering drawing） Configuration parameter meaning of PROE engineering drawing These options control text that has nothing to do with the other options; drawing_text_height sets the default height of all the text in the drawing using the drawing_units setting value; text_thickness sets the default text size for the new text after regeneration, as well as the existing text that is not modified in thickness. The value is indicated by the drawing unit; text_width_factor sets the default ratio between the text width and the text height until the width of the text width command changes the width, and the system does not retain the value; Two: these options control views and their annotations; broken_view_offset is the two part of the section view offset distance; create_area_unfold_segmented makes a cross-sectional view of local expansion of the size of the display, similar to the cross-sectional view all expanded the size of the display, such as setting a yes, then create a new view, view display segment. This option only affects new views; def_view_text_height sets the text height of the view and the view name in the arrow in the cross section view and the projection detail view; def_view_text_thickness sets the default text thickness of the newly created cross section view and projection detail view for view annotations and view names in arrows; default_view_label_placement sets the default location and alignment of view labels; detail_circle_line_style specifies the circle setting of the drawing masters detailed view; detail_circle_note_text determines the text to be displayed in the non ASME-94 detailed view referenced to the annotation; detail_view_boundary_type determines the default boundary type on the parent view of the detailed view; detail_view_circle sets the display of this circle around the round section of the model that is represented in detail by the detailed view; detail_view_scale_factor det