proe技巧（proe技巧）.doc

proe技巧（proe技巧） Proe4.0 configuration file: config.sup/config.pro order: read config.sup first, and then read config.pro Save in folder: x:\PTC\proeWildfire 4.0\text Pro_unit_length UNIT_MM sets the length of the default unit of MM Pro_unit_mass UNIT_KILOGRAM settings quality, default unit is kg (kg) The default unit for pro_unit_sys MMKS is mmks (millimeters, kilograms, seconds) Bilingual menu: Menu_translation both Set_menu_width 12 Attach_menumanager yes Skill： 1. modify the workspace color: View Display Settings system color layout default etc. 2. modify the part color: View color and appearance 3. delete the old version (not restored): window open the system window to enter; purge can (not recommended) 4. turn off the resource browser: activate first press the space 6. the graphics drawn from the grass come from the data file: Sketch from data file to system file / color palette 7., select the surface ring: left click on the feature, then click on the edge, then again, press shift and left, click the surface 8. select a number of faces and edges (add): left click on the feature select a face at the same time press Ctrl and left click on other side or side 9. select multiple surface (except the second select / deselect all the other side surface): left click features to select a face, at the same time as shift and left click on the other surface (as in the final non selected) to release Sshift Right click of 10.proe: select a plot element, click the right button, do not let go, stay for a few seconds, that is, the corresponding function appears 11. query selection: place the mouse in the desired element position. Switch right click until you want to add the desired feature 12. select the area around the surface: left click on the feature, then click on the face of a feature, click shift and click on the selected side 13. what is the immediate trait: the features that can be built without entering the drawing environment 14. hole 1 linear hole: 5 dragging h