tspt（TSPT）.docVIP

tspt（TSPT） TSPT2011 2010-11-30 beam 1. modify the beam direction angle is too small due to the anti BUG value direction 2. modify the label after the connection not drag the BUG focus mark 3. modify the steel beam with a single row row mark modification time of single BUG. 4. modify the calculation of the same standard beam buried buried BUG layer can not be normal. 5. modify the settings dialog box beam without deflection limit value of text. 6. according to the seismic code to modify 6.3.3, proofreading and automatic reinforcement with all this modification. 7. according to the seismic code modify the beam longitudinal reinforcement, the reinforcement ratio of 2.5%, no longer as over reinforcement conditions, but the school trial retained when prompted. 8. increase on simple support beam reinforcement with ribs under the requirements of 1/4. 9. add a beam set import and export functions in the first page to set the sign, the user setting file assigned to the position he needs. 10. merge adds weighted merging algorithm, which can separate the reinforcement of the beam with larger separation. Wall column 1. structure edge component constraint length and constraint boundary restraints length set apart structure defaults to 200. 2. modify the structure of edge members connected and disassembled condition to change the shape of the shadow, no longer with flange shaped T. Increase the concealed column and column stirrup ratio is calculated the overlapping part of the wall column settings option 3. 4. remove the original structure of edge member strengthened, only the bottom and the other. 5. increase embedded axial compression ratio, axial compression ratio shown in the search, to guide the user to search. 6. according to the seismic code modify structural element and edge boundary elements to calculate the minimum reinforcement ratio and minimum stirrup ratio. 7. modify the proofreading of the provisions in the show. 8. merge adds weighted merging algorithm, which can