主压实度（Master degree of compaction）.docVIP

主压实度（Master degree of compaction） Abstract: subgrade construction will make the soil structure become loose, in order to make the roadbed have enough strength and stability, must be compacted to improve its compactness. The purpose of compaction is to make the soil particles recombine and push each other tightly, so that the unit quality of the soil is improved, and finally the strength is increased and the stability is increased at the same time, so as to form a dense whole. Thus, the pavement has enough mechanical strength and good stability to resist the action of the vehicle load. This paper from the aspects of field density test factors affecting compaction effect, determine the standard of compaction, which commonly used detection methods of factor analysis and detection method of highway roadbed compaction, and discusses the importance of subgrade compaction of subgrade construction. Key words: highway subgrade; degree of compaction; influencing factors; detection Subgrade construction will destroy the natural state of natural soil, make the soil structure become loose, and the particles need to be re assembled. In order to make subgrade have enough strength and stability, it must be compacted so as to improve its compactness. The purpose of compaction is to make the soil particles recombine, squeeze each other and reduce the porosity, thus improving the unit quality of soil and eventually increasing the strength and stability at the same time. To improve the subgrade strength and stability, to reduce the permeability of subgrade and decrease due to various reasons caused by the inhomogeneous deformation of the subgrade pavement, so as to ensure the vehicle load resistance has enough mechanical strength and good stability, in order to improve the road service life, reduce maintenance costs. The compaction of subgrade is a very important link in the process of subgrade construction, and it is also the fundamental measure to improve the strength and stability o