低压开关柜（Low voltage switch cabinet）.doc

低压开关柜（Low voltage switch cabinet） Low voltage switch cabinet edit this section low voltage switch cabinet definition and type Low voltage switchgear is suitable for power plants, petroleum, chemical, metallurgical, textile, high building and other industries as transmission, distribution and power conversion. Products comply with IEC439-1, GB7251.1-1997 low-voltage switchgear equipment standards. Low voltage switchgear has passed national 3C certification. There are the following types: MNS low-voltage switchgear [1] GCL low-voltage switchgear type GCS low-voltage switchgear GCS GCK low-voltage switchgear switchgear GGD low voltage fixed type switch cabinet assembly type low-voltage switchgear type MNSC low-voltage switchgear MS low-voltage switchgear type GCS low-voltage switchgear withdrawable low voltage switch cabinet MNSQH GCS LV low voltage switchgear withdrawable switchgear GCK [2] GCK (L) basic electrical parameters of low-voltage switch cabinet 1, rated insulation voltage of AC 660V, rated working voltage of 2 380V, 3 50Hz, 4 rated frequency rated current rated current of 630-6300A bus: horizontal vertical busbar 630-1600A 5, rated short-time withstand current rated peak withstand current (IS) 30-80KA rated short-time withstand current (IS) 30-80KA 6, rated withstand peak current level of bus (bus) 63-176KA vertical bus (busbar) 63-176KA GGD low voltage switchgear [3] conditions of use * ambient air temperature shall not exceed +40 DEG C, not lower than -5 DEG C, and the average temperature in 24h shall not exceed +35 degrees centigrade. * clean air, at the highest temperature of +40, the relative humidity of not more than 50%, in the low temperature, allowing a larger relative humidity. * pollution level 3. * the elevation of the installation site shall not exceed 2000m. * special conditions of use, and will be negotiated after ordering. 1, from the structure of the form (1) fixed type: can satisfy each electrical component reliably fixed in the cabinet bo