公路工程试验检测信息管理系统的设计与实现（Design and implementation of testing information management system of highway engineering test）.doc

公路工程试验检测信息管理系统的设计与实现（Design and implementation of testing information management system of highway engineering test） Article number: 0451-0712 (2003) 06-0112-04, CLC number: TP315, document identification code: B Highway engineering test information management system Design and implementation of Feng Xilu, Wang Lanying, Huang Huashan Hebei highway engineering quality supervision station, Shijiazhuang 050000, China) Abstract: the highway engineering test information management system is introduced systematically The computer network dynamically controls the work quality of the test and test institutions. Key words: test detection; management; system design One Any link must be tested by test data. It is not only the basis for design and construction, but also the only way to quality arbitration. It is also an important means to control the quality of the project. Therefore, as a basis for testing, data filling, processing and drawing test forms are particularly important. Highway engineering test and management information system (H ighw ay) T est2Management Information System, referred to as HT 2 M IS () is a science and technology program of Hebei Provincial Communications Department. It was developed jointly by Hebei highway engineering quality supervision station and China Huayan Software Co., ltd.. It is based on the technical standards and test procedures issued by the State Administration of quality supervision, the Ministry of communications and the Ministry of construction, and developed a computer aided test system suitable for the national highway engineering test and inspection institutions. The system can not only through the computer technology of soil, asphalt, cement, stone, metal, water, inorganic binder, aggregate, and bridges and tunnels, with the ratio of test items for data processing, but also on the laboratory work of computer automation management. Using this system, it can help the testing institutions to meet the requirements of measurement,