准确确定框架—剪力墙结构中各分部结构的抗震等级（To accurately determine the seismic level of each segment structure in frame shear wall structure of the）.doc

准确确定框架—剪力墙结构中各分部结构的抗震等级（To accurately determine the seismic level of each segment structure in frame shear wall structure of the） Frame shear wall structure is a kind of common structural form of building engineering. In the frame shear wall structure, the ratio of the seismic overturning moment and the total overturning moment of the structure is the important basis to determine the seismic grade of the frame and shear wall. In this regard, GB50011-2001 code for seismic design of buildings 6.1.3 JGJ3-2002 , technical specification for concrete structures of tall building 8.1.3 made clear, how to understand the code spirit, accurately determine the seismic grade frame, shear wall, ensure the design quality of the reinforced concrete frame shear wall structure, structure designers often encounter problems. Let me talk about some of my personal knowledge. The GB50011-2001 specification 6.1.3 stipulates: the frame shear wall structure, the basic mode of action, if part of the frame under seismic overturning moment is greater than the total seismic overturning moment of the 50%, the seismic grade frame portion shall be determined according to the frame structure, the maximum height is appropriate to increase the frame structure. The JGJ3-2002 specification 8.1.3 stipulates: the frame shear wall structure seismic design, earthquake effect in basic mode, part of the framework under seismic overturning moment is greater than the total seismic overturning moment of the 50%, the seismic grade should be part of the framework by the use of the framework structure; the maximum height and width of the comparable framework appropriate increase. The spirit of the provisions of the two is consistent. According to the above provisions, the shear wall structure design of reinforced concrete frame, first of all should be based on the percentage of frames under seismic overturning moment total seismic overturning moment, to determine their level of seismic frame shear wall. Usually, ac