怎样磨合出更锋利的爱车（How to run a more sharp car）.docVIP

怎样磨合出更锋利的爱车（How to run a more sharp car） How to run a sharp car Beijing Hyundai Tucson since the market has maintained a hot market situation, Tucson 2 launched to meet the needs of more consumers, sales of blossom everywhere. But the running and maintenance of most of the users of SUV is not very clear, recently the reporter interviewed the 4S shop technicians and some old customers, for new users faq. Answer: how high speed running in period? The manual must be in Tucson 2, low starting block, and avoid the step on the accelerator after the start promptly changed into high gear. Not allowed to use for a long time the first gear or high gear driving in each gear are not the engine speed and the speed limit is reached, the engine speed control at 3000 rpm within. The Tucson 2.7 automatic engine speed should be controlled within 2500, the speed should be controlled at 80 mph or so, avoid at high speed or low speed continuous operation, with medium speed engine is appropriate. Because of the high speed of the engine and the transmission increased mechanical load, so the speed should be controlled within the specified scope, must not be at this time to prove drill, run run wild, the general principle is soft driving. Answer: two period to pull high speed? High speed engine work in a non optimal state for a long time, the engine is easy to form carbon, decreased light power performance, heavy oil block, engine damage. Experienced users should regularly pull high speed, not only in the running in period. In car everybody is not willing to big oil, carbon is the most serious, so it is necessary to pull the appropriate speed. In 1000 kilometers to 1500 kilometers, can gradually increase the engine speed and vehicle speed to the highest rate of acquiescence. Every time the longest pulling speed not more than 5 minutes. The Tucson 2 manual, each pulling speed for each gear should reach a speed limit. And Tucson 2.7 automatic may not reach a top speed of 150 mph, must be the