慢脉冲化成技术在铅酸动力电池中的应用（Slow pulse formation technology in the application of lead-acid battery）.docVIP

慢脉冲化成技术在铅酸动力电池中的应用（Slow pulse formation technology in the application of lead-acid battery） Slow pulse formation technology in lead-acid battery application in Beijing LIAN Technology Development Co. Ltd., all network Application of slow pulse formation technique in lead acid battery The electric bicycle VRLA battery production scale and production continues to expand, because the requirements of environmental protection, the vast majority of manufacturers have been from the initial transformation of tank formation for battery, the process is generally three two and four three full charge, as time is more than 100h, the longest. At around 130h, so the formation has become the longest battery manufacturing process, the pool occupied workshop in formation, and tested the battery cycle life performance. First, the main characteristics of slow pulse formation Because of the slow pulse in the formation process, it can shorten the formation time and improve the production efficiency. The 12V10Ah battery will only take more than 70 hours to complete the process, saving more than 30h of the time than the conventional chemical process. The main topic is the phase constant current charging charging process will produce large amounts of gas, thus delaying the diffusion of sulfuric acid and water in the paste in the pores of gas generated at the same time the liquid discharge paste into the pore, partition, if many gas can cause acid splash, many will enter the upper end or discharged electrolyte battery battery. This has seriously affected the formation efficiency; while the slow pulse formation process using a multi-step intermittent step, can greatly reduce the gassing rate, the sulfuric acid and water have plenty of time to the internal diffusion plate, the solution concentration when electric polarization decreased, so the formation efficiency is relatively high. The constant current charging phase because of the internal resistance of the battery will release a lot of hea