抽屉设计（Drawer design）.doc

抽屉设计（Drawer design） Drawer structure The standardization of furniture parts and general design is first established on the basis of the 32mm system, supplemented by the double modulus, special parts of its products to be allocated to achieve Julai special hole. For the latter, for example, the mechanical properties of wood components itself than the artificial plate with the same specification, so some of the smaller size of the wood components in the dowel connection or dowel hole hardware connection, can be considered Julai implementation using 20mm. And like door hinge side hole positioning hole distance, some 52mm, and some 48mm. They can only be determined according to the size of the shape of the hardware and the use of the corresponding hole distance, these special hole distance can be dedicated drilling equipment once or more times to complete. And versatility refers to the same product or different products of the same component in the assembly can be arbitrarily matched performance. Generally speaking, as long as the requirements of process documents, standardized design, 32mm system and the completion of special hole distance, can achieve the versatility of furniture components. Standardized drawer and universal design is in practice based on the production of furniture materials, equipment and hardware accessories such as main and auxiliary materials, integration, in order to make the furniture in the design, manufacture and customer service service, fast and accurate. The main design basis is standardized design methods, the key knowledge of 32mm system, and human engineering, standard hardware fittings specifications, sheet specifications and size of the drawer and other factors. The goal of the design is: 1) according to the composition and structure of the drawer, the components of the drawer are standardized, universal and serialized so that the drawer design meets interchangeability; 2) serialization of product sizes. Two. Standardization and gener