机械设计简答题（Mechanical design brief answer）.docVIP

机械设计简答题（Mechanical design brief answer） The hinge four bar mechanism has the integral rotating pair, the condition is that the sum of the length of the shortest rod and the longest rod is less than or equal to the sum of the other two rod lengths; the whole rotating pair is composed of the shortest rod and its adjacent side. A hinged four bar mechanism with a rotating pair; is there a crank?: 1) when the shortest rod is used as a frame, there are two rotating pairs on the frame, so the double crank mechanism is obtained. 2) when the shortest side of the rod is used as a frame, there is only one turn pair on the frame, so the crank rocker mechanism is obtained. 3) when the opposite side of the shortest rod is a frame, there is no integral rotating pair on the frame, so a double rocker mechanism is needed. This is the whole A hinged four bar mechanism that turns vice without a crank; often used as the oscillating mechanism of an electric fan. Disk cam: it is the most basic form of cam. The cam is a disk shaped part that rotates about a fixed axis and has a varying radius. Moving cam: when the rotating center of the disk cam tends to infinity, the cam moves in a straight line relative to the frame. This cam is called a moving cam. Cylindrical cam: the moving cam into a cylinder, that is, cylindrical cam. Law of motion of follower 1. isokinetic exercise: follower push for isokinetic exercise, the line graph is a linear velocity line graph as a horizontal line. The resulting huge inertial force causes a strong impact. The strong impact, known as rigid shocks, can cause serious harm. The law of constant velocity and motion should not be used alone, and the beginning and ending of motion must be corrected. 2. harmonic motion: when a point moves uniformly on a circle, the motion of its projection on the diameter of this circle is called harmonic motion. From the acceleration diagram, the law of simple harmonic motion has a sudden change in the acceleration value at the begi