模版支撑计算（Template support calculation）.docVIP

模版支撑计算（Template support calculation） Fastener steel slab formwork bracket calculation Calculation according to 1 construction of fastener type steel pipe scaffold safety technical specifications (JGJ130-2001). Calculation according to 2 construction technology, 2002.3. fastener type steel pipe formwork, high support frame design and use safety (Du Fu). The formwork support shall be erected at a height of 5 meters. The dimensions shall be as follows: the vertical distance of the vertical rod is b=1.20 meters, the vertical distance of the vertical rod is l=0.90 meters, and the distance of the vertical rod is h=1.50 meters. Figure 1 Vertical sketch of floor support frame Figure 2 Load calculation unit of floor support frame The adopted steel tube type is 48 * 3.5. Template panel calculation The panel is a flexural structure, and its flexural strength and stiffness need to be checked. The formwork panel shall be calculated in accordance with the three span continuous beam. Static load standard value Q1 = 25 * 0.110 * 1.200+0.340 * 1.200=3.708kN/m live load standard value Q2 = (2.000+2.500) * 1.200=5.400kN/m Moment of inertia panel I and bending moment of W were: in this example, the section moment of inertia I and bending moment of W were: W = 120 * 1 * 1.00/6 = 20.00cm3; I = 120 x 1 x 1 x 1.00/12 = 10.00cm4; (1) the bending strength calculation of F = M / W [f] f M W - [f] - panel bending strength calculation (N/mm2); the maximum bending panel distance (N.mm); net section panel resistance moment; bending strength of panel design value, 13.00N/mm2; M = 0.100ql2 where Q load (kN/m); the calculated M = 0.100 * (1.2 * 3.708+1.4 * 5.400 * 0.300 * 0.300=0.108kN.m) calculated by the panel bending strength calculation value f = 0.108 * 1000 * 1000/20000=5.404N/mm2 panel bending strength calculation of F [f], meet the requirements! (2) shear calculation [cant calculate] T 3Q/2bh = [T] One of the biggest shear (Q=0.600 * 3.708+1.4 * 1.2 * 5.400) for calculating the shear stren