水吸收空气中nh3填料塔的课程设计（Curriculum design of water absorption NH3 packed tower in air）.docVIP

下载本文档

9
0
约1.03万字
约 14页
2017-08-18 发布于河南
举报
版权申诉

水吸收空气中nh3填料塔的课程设计（Curriculum design of water absorption NH3 packed tower in air）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

水吸收空气中nh3填料塔的课程设计（Curriculum design of water absorption NH3 packed tower in air）

水吸收空气中nh3填料塔的课程设计（Curriculum design of water absorption NH3 packed tower in air） Design task book (1) design topics Design a packed absorber for removal of ammonia mixed with air. Processing capacity of mixed gas is 1000 m3/h, which containing ammonia is 8% (volume fraction), the requirements of the exhaust gas in ammonia containing less than 0.02% (volume fraction), the water absorption, absorbent dosage is 1.5 times of the minimum amount of. (20) the solubility coefficient of ammonia in water is H = 0.725kmol/ (m3.kPa) (two) operating conditions 1. operation pressure is normal pressure, operation temperature is 20 centigrade 2. packing type polypropylene ladder ring packing, filling specifications optional. 3. working days take 300 days a year, 24 hours a day for continuous. (three) design content; 1. material balance of absorption tower; Calculation of process size of 2. absorption tower; 3. calculation of pressure drop of packing layer; Size calculation of 4. absorption tower nozzles; Fig. 5. design condition diagram of absorption tower; 6. comment on the design process and discuss the related issues. Two, design scheme (1) flow charts and process instructions In the packed tower, ammonia and air are mixed and transported into the packed tower through the lower side of the packing tower, and contacted with the counter current flowing from the top of the packing tower, and then absorbed under the action of the filler. The absorbed gas mixture is removed by the tower top, and the water absorbed by ammonia gas flows out from the lower end of the packed tower. (two) selection of packing and absorbent The amount of the process is not too large, and the diameter of the tower used will not be too large. The 25 * 12.5 * 1.4 polypropylene ladder ring packing can be used. The main performance parameters are as follows: Specific surface area at:223 void content: 0.90 Wet packing factor: packing constant A:0.204 K:1.75 See below: According to the gas mixture to be treated,