汽车名称解释（Auto name explanation）.docVIP

汽车名称解释（Auto name explanation） rear axle The rear axle is the device used to support the wheels and the rear wheels. If it is a vehicle driven by the front axle, then the rear axle is only a follow-up axle, only bearing the role. If not the front axle drive axle, rear axle drive axle is so, this time in addition to the load outside but also to the drive and deceleration and differential role, if it is four wheel drive, usually in front of the rear axle is equipped with an actuator. The rear axle is divided into integral and half bridge. The whole bridge is equipped with non independent suspension, such as leaf spring suspension, half bridge, independent suspension, such as Mcpherson suspension. Drive axle directory [hidden] Function: Design of drive axle: Classification of drive axles The composition of the drive axle The drive axle is usually composed of a main reducer, a differential, a wheel drive, and a drive axle housing.. Its function is to fold the power transmitted by the universal transmission device by 90 degrees, change the direction of force transmission, and reduce the speed by the main reducer. After the torque is increased, the differential is allocated to the left and the right half shafts and the driving wheel. [edit this paragraph] function: Drive bridge at the end of powertrain, its basic function is: the engine torque universal transmission device came through the main gear tire differential axle to the drive wheel, realize deceleration torque; the main speed reducer gear change torque transfer direction; through the differential realization of both sides the wheel differential effect, ensure the inner and outer wheels turn at different speeds. [edit this paragraph] drive bridge design: The design of drive axle shall meet the following basic requirements: 1., the choice of the main reduction ratio should be able to ensure that the car has the best power and fuel economy. 2., small size, to ensure that the necessary ground clearance. Mainly refers