泥浆护壁（Mud protection wall）.docVIP

泥浆护壁（Mud protection wall） The 1. construction methods of bored piles of the 1.1 technological process: drilling location, burying the retaining tube, drilling rig location, correction, horizontal and vertical hole, hole cleaning, placing steel cage pipe, two times cleaning hole, pouring concrete, retaining test block. The 1.2: the main construction equipment 1.2.1 special hole forming machine: drilling machine, suction pump, slurry pump, air suction mud machine, slag extraction cylinder, etc.. The 1.2.2 concrete mixing machine tools: metal conduit, concrete bucket, storage hopper, lifting device, water frame, concrete mixer and metering and transport equipment. The 1.2.3 pulping machines: mud mixers, mud pumps, air compressors, water pumps, cyclones, inertial vibrating screens, sludge cleaning equipment, slurry density profiles, funnel viscometer, and sand content measuring apparatus. The 1.2.4 other equipment: welding machine, welding machine, pneumatic steel hook machine, cutting machine, welding machine, wrench, crane rope measuring and measuring hammer. The 1.3 pile hole positioning: before construction, according to the pile axis, each pile leads to the center of the cross line, small nails fastened in the pile hole near the stake with the center line, the pile position deviation within 10mm, and has laid a solid mark stake. The 1.4: shield tube burying tube commonly used tool type steel tube, using a rotary drill, drill diameter than the diameter of 100mm, on the upper part of high 1 ~ 2 overflow hole, the position of the buried steel tube accurately and stably, between tube and wall filled with clay, casing and pulp discharge port mud ditch, casing center line and the pile line deviation of not more than 50mm, casing in cohesive soil depth of 1 meters, casing is higher than the ground 100 ~ 200mm, for free floating wall mud surface, scour hole wall collapse caused by lead, maintain higher level of underground water hole plasma surface more than 1.0m. The 1.5