测量总结（Measurement summary）.docVIP

测量总结（Measurement summary） To ensure that each part of the route and structure can accurate positioning and construction process of individual pile loss can also have enough accuracy for recovery of pile position. The measuring staff formally accepted the traverse points and leveling points of pile position, should be based on the specification and technical requirements of construction site, immediately carry out encryption work measurement and control network construction. Encryption, measurement, networking and embedded pile control network calculation completed by independent measurement. Complete the work of the staff should have qualified qualifications and work experience, the use of the instrument must be tested for calibration, the accuracy meets the requirement. To control network surveying party encryption safety case. Complete the measurement control network encryption work, the book should be oriented to supervision engineer submit reports and information data calculation. Review supervision engineer test results for review, that is accurate, precision to meet the requirements, can be used as control points. Review of construction lofting The measurement personnel should according to the design requirements the location and elevation of road structures, correctly fixed to the ground. In order to prevent the error construction lofting survey, bringing losses to the project, has been perfected and approved by the engineer measurement and control network construction, start construction lofting work concrete project. In the survey and setting out before the start of measurement should submit a survey layout plan, supervision personnel measurement lofting process should be next to the station, to ensure the construction lofting method and correct reading. The inspection and surveying table records should be audited prior to commencement of construction supervision engineer sign. First of all, preparation of measurement scheme, in the construction process of