机床夹具设计毕业论文（Design of machine tool jig）.docVIP

机床夹具设计毕业论文（Design of machine tool jig） Preface this course design is a very important learning link of mechanical manufacture and automation. It is a comprehensive inspection, consolidation and improvement of the mechanical knowledge that has been learned since the entrance. The course design is the application of basic theory, professional knowledge and skills to analyze and solve practical problems in production of a comprehensive training. The knowledge can be integrated into the actual parts processing. Through this design, I consolidate the knowledge already learned, deepen the impression, so that I can use the knowledge of mechanical processing to solve some specific problems. This course design involves the knowledge of fixture design, installation, parts processing, numerical calculation, tool performance, measurement technology, CAD mapping was involved in metal materials, tolerance and processing equipment and other aspects of knowledge. Through the curriculum design, I found myself, there are still many knowledge, not firmly grasp. But more is through this design makes me improve, consolidate and expand the theoretical knowledge and skills they learn, improve their design calculation and drawing, the ability to write technical documents to learn the correct use of technical information, standards, manuals and other reference books and in this design I developed a preliminary mechanical design independently the actual work ability, establish correct thoughts, to master the mechanical processing design method of certain steps and ideas for future study and design work has laid a good foundation. At the same time, also make me realize the teacher usually to us earnestly good intentions. Due to my limited level, there are many inadequacies in the design, I hope Chen criticized and corrected! Graduation design fifth group -1- the first chapter introduction to machine tool fixture in machining of the workpiece, in order to guarantee the processing requirements,