皮带司机（Belt driver）.docVIP

皮带司机（Belt driver） - Driver belt theory review questions 1, coal mine belt conveyor are: ordinary tape, steel belt, steel wire rope traction belt. 2, the belt conveyor is mainly composed of a machine head and tail. The roller rack. Conveyor belt tensioning device and cleaning device etc.. 3, the belt conveyor machine is composed of motor fluid coupling reducer main transmission device unloading arm etc.. 4, the body part is composed of a belt conveyor roller and the rack 5, in the inclined tunnel used in belt conveyor must be fitted with anti reversing device or braking device. In 6, the belt head and tail device to prevent persons with the drive roller and guide roller contact fence. 7, smoke protection installation position in the cylinder head unloading 5M outlet. 8, fault protection is a kind of when the conveyor belt running off, to prevent accidents and protecting device and a parking brake. 9, the national standard frequency of communication in our country is 50HZ. 10, belt conveyor roadway in fire pipeline, every 50M installation must always have water to set up a pipe fittings and valves. 11, the conveyor head should have not less than 0.2 cubic meters of sandbox and more than 2 fire extinguishers and fire hose must also have 25M. 12, all with hydraulic coupling nonflammable liquid or water as the working medium. 13, hydraulic coupling must be qualified and easy to use explosion-proof body containing plunger. 14, the buffer layer surface drag roll wear amount shall not exceed half of the original thickness. Welding and deformation of 15 frame, frame and machine tail tension device, tail sliding shoes should be smooth, tightly connected. 16, more than two sets of conveyor chain device should be set up. 17, belt conveyor three four back is: knowledge structure of equipment, equipment performance, knowledge structure, operation principle, will maintenance, maintenance, remove common breakdown. 18, belt conveyor drivers must be trained, qualified examination cer