耦合、耦合器件详解（Coupling and coupler detail）.docVIP

耦合、耦合器件详解（Coupling and coupler detail） [discussion] coupling and coupler detail (Reprint) Coupling refers to the process of transmitting signals from the first level to the second level, which usually means AC coupling when not indicated. Decoupling means The power supply adopts further filtering measures to remove the influence of mutual interference between the two signals. The coupling constant refers to The time constant corresponding to the product of the coupling capacitor value and the second stage input impedance. There are three purposes of decoupling: 1. removing the high frequency ripple in the power supply, and passing the high frequency signal of the multistage amplifier through the power supply When the 2. signals work, the circuit increases the power supply demand, causes the power supply fluctuation and reduces the voltage by decoupling The influence of power fluctuations on the input stage / high voltage gain stage; 3., the formation of suspended or suspended power supplies in complex systems Coordinate the matching of each part of the ground or the power supply. 1, coupling, meaning connected. 2 a coupling element, especially a component that directs input and output to produce contact. 3, decoupling devices refer to components that eliminate signal contact. 4, decoupling capacitors, referred to as decoupling capacitors. 5, for example, transistor amplifier emitter has a self bias resistor, it also makes the signal from the pressure drop back to the input form coupled input and output signals, the resistance is a coupling element, if the resistance is connected in parallel with a capacitor, the capacitor in the appropriate capacity of small AC signal impedance the (which requires computing) which decreases the coupling effect of resistance, so that this capacitance decoupling capacitor. The high frequency switching noise generated by the active device during switching will propagate along the power line. The primary function of the decoupling capac