耳机基础知识（Headset Basics）.docVIP

耳机基础知识（Headset Basics） Headset Basics Published: 2011-11-02 23:10 | classification: personal diary read: (0) comments: (0) Headphones are personal audio, and its choice is naturally a personal problem, any ones experience can not be pushed and wide. The use of headphones, the time and place of using headphones, their likes and dislikes, and the sound quality of headphones are all things to consider when choosing a pair of headphones that suit you. First, the type of headset The headset is classified according to the type of its drive (transducer) and how it is worn. 1. Moving coil type The moving coil earphone is the most common and common headphone, and its drive unit is basically a small moving coil loudspeaker, driven by a coil of sound in the permanent magnetic field and connected with the vibration film vibration. The moving coil earphone has higher efficiency, and most of the earphone can be driven by the earphone on the stereo, and the utility model has the advantages of reliability and durability. 2, equal magnetic Similar to a reduced planar loudspeaker, a magnetic headphone drives a flat ring of sound into a thin vibrating membrane, which, like a printed circuit board, allows the driving force to be equally distributed. The magnet is concentrated at one or both sides of the diaphragm (push-pull type), and the vibrating film is vibrating in the magnetic field formed by it. The earphone diaphragm is not as light as that of an electrostatic earphone, but has the same large vibration area and similar sound quality. It is not as efficient as the moving coil earphone, and it is not easy to drive. 3, electrostatic The electrostatic earphone has light and thin vibrating film, which is polarized by high DC voltage. The electric energy required for polarization is converted by alternating current and also powered by batteries. The vibration film is suspended in an electrostatic field formed by two fixed metal plates (stator), and when the audio signal is loaded onto