自动波常见故障（Common trouble of automatic wave）.docVIP

自动波常见故障（Common trouble of automatic wave） 1, there is a feeling of shock when driving Answer: this problem including high speed high speed drive has high speed and acceleration process of two kinds of stationary process, easy to test, for example, an engine displacement of 2.0L vehicle at 2600 rpm and can reach speeds of 100 km, if a period of time often need to turn 3000 or more parties can reach 100 kilometers, is this failure, this failure is usually due to high speed gearbox failure or internal locking button device for clutch failure caused by the need to immediately repair the gearbox. The high speed acceleration process, the fault test is a bit complicated, because of the acceleration process, increase the engine speed and the accelerator pedal has close relationship, for example, a normal small engine throttle Pasa te in general body speed to 2500 RPM can put the vehicle acceleration, but the engine at full throttle will ascend to theturn, such a huge contrast is due to fuzzy logic electronic control system of the gearbox to control, so the standard requires some professional standards to be completed. 2, into the file late into the stall, fire into the file shock Answer: test entry standard is to start the engine, idle, brake, into the file, the normal situation is 1 - 1.2 seconds, there is a sense of filing, Release the brake pedal, the vehicle will start slowly and gradually to extract 10 - 20 km / hour speed in the throttle pedal case, this is a normal standard into the file, if the file is more than 2 seconds into the file location is delayed, this situation requires immediate repair; if the file is strong shock feeling is positioned into the file, it is the automatic transmission of any file to a certain degree of shock feeling, if did not feel, but the internal fault, but the impact is relatively large and it is not acceptable, the problems caused by the complex includes many aspects besides transmission outside the file; the dead fire case