车工实习（Lathe work practice）.docVIP

车工实习（Lathe work practice） Lathe work practice is to train students to use sewing technology and operating lathe skills, and achieve an important part of technical grade standards. The use of a large number of materials, tools and a wide variety of tools needed in the process of turning practice. The consumption of materials and the loss of tools are considerable. Many expensive measuring tools are only needed in the processing of a specific workpiece. In view of this situation, it is necessary to explore some effective ways to reduce school practice expenditure. The author sums up the old lathe work practice teaching experience, summed up the three aspects of practice in the process of turning savings. It is as follows: first, material saving in the process of lathe work practice materials accounts for a considerable proportion of the funds and materials in practice, there is considerable space savings, thereby saving the material is very important. With the following three methods, the material consumption can be reduced by more than 50% on the original basis. 1. subject integration in the lathe work practice there are a lot of content relatively simple topic, if the topic from practice is bound to cause large consumption of materials, which can be integrated into the project number, the difficulty is not the subject of practice. For example, the textbook generally have such three issues: the car inside the car, the outer cylindrical surface of cylindrical and conical surface inside and outside the car, the car can be integrated cone cylindrical surface and the cylindrical workpiece into car axle; car car cylindrical and conical surface into car sleeve parts. Integrate the three simple topics into two difficult subjects. 2., material extension, material continuity is the continuation of the subject before the end of the internship, as a follow-up topic of practice blank. For example, the finished workpiece of shaft workpiece is used as the practice blank for the sl